电子束产生大尺度等离子体过程的数值模拟研究

建立了一个四组分一维混合模型，对电子束注入大气产生大尺度等离子体的过程进行了数值模拟.结果表明了能量为140keV、流强为50mA/cm²的注入电子束，可以产生线度为0.5m，密度为10¹²cm^-3量级的大气环境下等离子体.电子束所伴随的空间电荷效应由于等离子体的产生会很快消失，不影响后续的等离子体产生过程.电子束注入流强主要影响产生等离子体的密度，而电子束能量则同时影响其空间线度和密度. 关键词： 电子束 碰撞 电离     

考虑到束-波相互作用的速调管离子噪声二维模拟

采用粒子模拟的方法并考虑电子束与电磁波的相互作用，首次直接得到了速调管输出信号的离子噪声图像，阐述了束电子、二次电子、离子、电磁场之间的相互作用的动力学过程. 指出离子噪声所表现出来的相位波动是由电子束速度的波动引起的，电子束速度的变化来源于管内离子数量的变化，离子的数量的变化又与电子束状态变化相互影响，这是离子噪声产生的根本原因. 二次电子对离子噪声产生过程的影响甚微，但是其行为却反映了离子噪声的形成机理. 离子噪声引发的输出信号幅度波动取决于电子束速度和半径的改变，与离子行为密切相关. 关键词： 离子噪声 速调管 粒子模拟 电子束     

Formation and hydrogenation of p(2 × 2)-N on Pt(1 1 1)

The formation of a well-ordered p(2 × 2) overlayer of atomic nitrogen on the Pt(1 1 1) surface and its reaction with hydrogen were characterized with reflection absorption infrared spectroscopy (RAIRS), temperature programmed desorption (TPD), low energy electron diffraction (LEED), Auger electron spectroscopy (AES), and X-ray photoelectron spectroscopy (XPS). The p(2 × 2)-N overlayer is formed by exposure of ammonia to a surface at 85 K that is covered with 0.44 monolayer (ML) of molecular oxygen and then heating to 400 K. The reaction between ammonia and oxygen produces water, which desorbs below 400 K. The only desorption product observed above 400 K is molecular nitrogen, which has a peak desorption temperature of 453 K. The absence of oxygen after the 400 K anneal is confirmed with AES. Although atomic nitrogen can also be produced on the surface through the reaction of ammonia with an atomic, rather than molecular, oxygen overlayer at a saturation coverage of 0.25 ML, the yield of surface nitrogen is significantly less, as indicated by the N₂ TPD peak area. Atomic nitrogen readily reacts with hydrogen to produce the NH species, which is characterized with RAIRS by an intense and narrow (FWHM ∼ 4 cm⁻¹) peak at 3322 cm⁻¹. The areas of the H₂ TPD peak associated with NH dissociation and the XPS N 1s peak associated with the NH species indicate that not all of the surface N atoms can be converted to NH by the methods used here.     

空间望远镜主镜的热光学特性分析

主镜是空间望远镜光学系统的重要组成元件,其热光学特性将为光学系统的热控设计提供依据。利用建立在集成分析基础上的热光学分析方法,分析了某空间望远镜主镜在三种不同的温度分布形式,即在径向温度、轴向温度、周向温度梯度的作用下对光学系统成像质量的影响,结合设计的要求,根据计算结果给出了许用温度梯度的范围。     

Dissociative excitation cross sections of the lead atom in collisions between electrons and PbI2 molecules

Dissociative excitation of the lead atom in e-PbI₂ collisions has been studied experimentally. 27 excitation cross sections were measured for an energy of the exciting electrons equal to 100 eV. Nine optical excitation functions were recorded with variation of the electron energy in the range 0–100 eV. The most probable reaction channels for low electron energies are discussed, as well as the ratio of the dissociative excitation cross sections for the lead atom in e-PbI₂ and e-PbCl₂ collisions. __________ Translated from Zhurnal Prikladnoi Spektroskopii, Vol. 73, No. 6, pp. 701–706, November–December, 2006.     

Comparison of growth stress measurements with modelling in thin iron oxide films

High temperature oxidation of metals leads to residual stresses both in the metal and in the growing oxide. In this work, the evolution of this residual stresses is theoretically predicted in the growing oxide layers. The origin of these stresses is based on a microstructural model. Using experimental results providing from the oxidation kinetics, and an analysis proposed to describe the growth strain occurring in the thin layers, a set of equations is established allowing determining the stresses evolution with oxidation time. Then, the model is compared with experimental results obtained on both α-Fe and phosphated α-Fe, oxidised at different temperatures. Numerical data are extracted from experiments either with an asymptotic formulation or with an inverse method. These two methods give good agreement with experiments and allow extracting the model parameters.     

a-C:F薄膜的热稳定性与光学带隙的关联

以CF4和C6H6的混合气体作为气源,在微波电子回旋共振化学气相沉积(ECRCVD)装置中制备了氟化非晶碳薄膜(aC:F),并在N2气氛中作了退火处理以考察其热稳定性.通过傅里叶变换红外吸收谱和紫外可见光谱获得了薄膜中CC双键的相对含量和光学带隙,发现膜中CC键含量与光学带隙之间存在着密切的关联,在高微波功率下沉积的氟化非晶碳膜具有低的光学带隙和较好的热稳定性. 关键词： 氟化非晶碳膜 光学带隙 退火温度 热稳定性     

生长温度对碳纳米管阴极场发射性能的影响

碳纳米管(Carbon Nanotubes,CNTs)场发射平面显示器(Field Emission Display,FED)与其他显示器比较显示了其独特优点,被认为是未来理想的平面显示器之一。碳纳米管阴极作为器件的核心部分,其性能的好坏直接影响显示器的性能。针对30~60英寸(76.2~152.4cm)大屏幕显示器所用的厚膜工艺,即采用丝网印刷法制备了碳纳米管阴极阵列,研究了化学气相沉积法在不同温度下生长的CNTs的场发射电流-电压特性,找到了适合FED用碳纳米管的最佳生长温度。结果表明生长温度越高(750℃),CNTs场发射性能越好。并用荧光粉阳极测试这些CNTs的场发射发光显示效果,验证了上述结论。     

电子回旋共振放电的电离特性PIC/MCC模拟(Ⅰ)——物理模型与理论方法

采用粒子模拟与蒙特卡罗相结合(PIC/MCC)的方法对电子回旋共振(ECR)放电中的电离过程进行了模拟，其中带电粒子与微波的相互作用由PIC方法的电磁模型描述，粒子间的碰撞过程由MCC方法描述.考虑的碰撞类型有电子与中性粒子的弹性、激发、电离碰撞，离子与中性粒子的弹性、电荷交换碰撞，碰撞截面均依赖于能量而变化.阐述了理论分析的过程，为数值模拟ECR放电奠定了基础. 关键词： 电子回旋共振放电 粒子模拟 蒙特卡罗 电离     

Ground-state properties of LiV2O4 and Li1-xZnx(V1-yTiy)2O4

We present susceptibility, microwave resistivity, NMR and heat-capacity results for Li_1-xZn_x(V_1-yTi_y)₂O₄ with 0 ? x ? 0.3 and 0 ? y ? 0.3. For all doping levels the susceptibility curves can be fitted with a Curie-Weiss law. The paramagnetic Curie-Weiss temperatures remain negative with an average value close to that of the pure compound Θ≈ - 36 K. Spin-glass anomalies are observed in the susceptibility, heat-capacity and NMR measurements for both type of dopants. From the temperature dependence of the spin-lattice relaxation rate we found critical-dynamic behavior in the Zn doped compounds at the freezing temperatures. For the Ti-doped samples two successive freezing transitions into disordered low-temperature states can be detected. The temperature dependence of the heat capacity for Zn-doped compounds does not resemble that of canonical spin glasses and only a small fraction of the total vanadium entropy is frozen at the spin-glass transitions. For pure LiV₂O₄ the spin-glass transition is completely suppressed. The temperature dependence of the heat capacity for LiV₂O₄ can be described using a nuclear Schottky contribution and the non-Fermi liquid model, appropriate for a system close to a spin-glass quantum critical point. Finally an ( x / y , T )-phase diagram for the low-doping regime is presented. Received 16 March 2001 and Received in final form 30 October 2001